 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| A FEATURES * * * * High Linearity (IIP3 + 18 dBm) Low Noise Figure ( 2.0 dB ) Single Supply (+8Vdc) Wide Bandwidth ( 50MHz - 1 GHz) Linear Amplifier MMIC Data Sheet - Rev. 1 ADA10001S3C APPLICATIONS * * Driver Amplifier CATV - Distribution / Drop Amplifiers S3C 16 Pin SOIC Package DESCRIPTION: The ADA10001 is a monolithic IC intended for use in applications requiring high linearity such as: Cellular Telephone Base Station Driver Amplifiers, CATV Fiber Receiver/Distribution Amplifiers and CATV Drop Amplifiers. Supplied in a surface mount, 16 lead-SOIC package, it is well suited for use in amplifiers where small size, reduced component count, and high reliability are important. ABSOLUTE MAXIMUM RATINGS PAR AME TE R V DD/ V RFOUT V R F IN RFIN Storage T mperature e S olderi ng T mperature e S olderi ng Ti me Thermal Resi stance - 65 MIN . 0 MAX . 12 0 + 10 +150 260 5.0 35 U N ITS VDC VDC dB m C C S e c. C /W ADA10001S3C ELECTRICAL SPECIFICATIONS MIN . 60 65 14 15 2.0 +35 +15 +38 +18 3.5 TYP. (TA = +25 C, RF = 50 to 1000 MHz, Test System = 75W, VDD = + 8VDC) PAR AMETER C SO2 C TB2 Gai n Noi se Fi gure 2nd Order Input Intercept Poi nt (IIP2)3 3rd Order Input Intercept Poi nt (IIP3)3 MAX. U N ITS dB c dB c dB dB dB m dB m 1. The device can be operated at + 6 VDC for lower power dissipation; Refer to the figures on page 3 for performance variation with supply voltage. 2. 160 channels, + 23 dBmV per channel, (measured at the output) 6 MHz channel spacing. 3. Two tones, - 10 dBm per tone at input. OPERATING RANGES PAR AMETER V DD IDD C a se Temperature MIN . 4 50 -40 TYP. 81 MAX. 9 150 70* U N ITS Volts mA C A 2 ADA10001S3C Gain and Noise Figure vs Frequency Tc = 25 deg C, VDD = +8V 18 17 Gain (dB) 16 15 14 13 12 50 250 450 650 Frequency (MHz) 850 4 Noise Figure (dB) Gain (dB) 3.5 3 2.5 2 1.5 1 15.8 15.75 15.7 15.65 15.6 15.55 4 Gain and Noise Figure vs. VDD Tc = 25 deg C, RF = 500 MHz 2.02 1.98 1.96 1.94 1.92 1.9 1.88 5 6 7 VDD (volts) 8 9 Noise Figure (dB) 2 GAIN NF GAIN NF IIP2,IIP3 vs. VDD Tc = 25 deg C 40 IIP2 (dBm) 36 32 28 24 20 12 20 24 IIP3 (dBm) Pin vs. Pout Tc = 25 deg C, VDD = +8V, RF = 500 MHz 16 4 5 6 IIP2 7 IIP3 8 9 VDD (volts) out (dBm) Pin (dBm) * Notes: IIP2 Measured at 986.5 MHz, Input = two tones (55.25 MHz and 931.25 MHz) at - 10 dBm. IIP3 Measured at 986.5 MHz, Input = two tones (986.5 MHz and 992.5 MHz) at - 10 dBm. A 3 ADA10001S3C D C LE E H 0.015 [0.38]X45 L a A A2 A1 GAUGE PLANE 0.003 [0.076mm] SEATING PLANE e B1 B S Y M INCHES B O L MILLIMETERS MIN. MAX. NOTE NOTES: 1. CONTROLLING DIMENSION: INCHES 2. DIMENSION "D" DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. MOLD FLASH, PROTRUSIONS AND GATE BURRS SHALL NOT EXCEED 0.006 [0.15mm] PER SIDE. 3. DIMENSION "E" DOES NOT INCLUDE INTER-LEAD FLASH OR PROTRUSIONS. INTER-LEAD FLASH AND PROTRUSIONS SHALL NOT EXCEED 0.010 [0.25mm] PER SIDE. MIN. MAX. A A1 A2 B 0.058 0.004 0.055 0.013 0.062 0.008 0.380 0.150 0.068 0.010 0.065 0.020 0.070 0.010 0.400 0.160 1.47 0.10 1.40 0.33 1.58 0.20 9.66 3.81 1.73 0.25 1.65 0.50 1.78 0.25 10.16 4.06 4 2 3 B1 C D E e H L LE 4. LEAD THICKNESS AFTER PLATING TO BE 0.013 [0.33mm] MAXIMUM. 0.050 BSC 0.226 0.016 0.030 0 8 0.244 0.040 1.27 BSC 5.74 0.41 0.76 0 8 6.20 1.02 SPECIFICATION: SUBJECT: 98000-006 PUBLISHED OUTLINE, 16 LEAD BATWING SOIC PKG. a EXTERNAL TEST CIRCUIT PIN FUNCTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 GND GND NC GND GND RF IN NC GND GND NC NC GND GND RF OUT NC GND 1000 pF 5 3.9 H RF OUT 1.5 pF VDD 1000 pF RF IN 5.6 nH 2.7 pF 0.1f A 4 ADA10001S3C INPUT IMPEDANCE START: 0.050 GHz STOP: 1.00 GHz 1: 0.050 GHz 79.76 - 4.79 j 1 .5 2 5 5 0 -.2 .2 .5 32 54 6 2: 0.20 GHz 77.88 - 13.21 j .2 1 3: 1 2 5 4: 0.40 GHz 70.02 - 21.83 j 0.6 GHz 59.63 - 26.56 j 0.8 GHz 49.91 - 26.56 j 1.0 GHz 41.77 - 25.15 j -5 5: -.5 -1 -2 6: Measured in 75 System OUTPUT IMPEDANCE START: 0.050 GHz STOP: 1.00 GHz 1 .5 2 3: 1: 0.050 GHz 83.9 - 8.1 j 0.20 GHz 84.17 - 1.19 j 2: .2 5 1 5 4: 0.40 GHz 85.38 - 2.27 j 0.6 GHz 87.64 - 3.82 j 0.8 GHz 90.20 - 6.60 j 1.0 GHz 93.57 - 11.76 j 0 -.2 .2 .5 1 6 2 5 -5 5: -.5 -1 -2 6: Measured in 75 System A 5 ADA10001S3C NOTES A 6 ADA10001S3C NOTES A 7 A ANADIGICS, Inc. 35 Technology Drive Warren, New Jersey 07059 Tel: (908) 668-5000 Fax: (908) 668-5132 http://www.anadigics.com Mktg@anadigics.com IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or discontinue any product at any time without notice. The Advanced Product data sheets and product specifications contained in this data sheet are subject to change prior to a products formal introduction. The information in this data sheet has been carefully checked and is assumed to be reliable. However, ANADIGICS assumes no responsibility for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices, or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. |
Price & Availability of ADA10001S3C
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |